How to share internet between 2 PC

It is my experience after trying various ways share internet between 2 PC, the way I think the most easy and quick to share internet between two PCs below. However, there are the conditions that:

    1. A computer has two LAN card (let's call it LAN 1 and LAN 2)

    2. A computer on the LAN 1 has been connected to the Internet via a modem and was able to be used for surfing the internet (ngenet)

    3. Computer B only need one LAN only (hereafter we call LAN 3)

    4. Computers A and B have been connected to the LAN cable types CROSS

As for how the connections are:
A computer on

1. Log start | Control Panel | Network Connections

2. Right-click the LAN 1 (which is connected to the internet modem) select the status tab support, note the IP Address, Subnet Mask and Default Gateway, for example:

IP Address: 192.168.1.2

Subnet mask: 255.255.255.0

Default Gateway: 192.168.1.1

*) Remember and take note! This is very important!

3. If it has been noted Close, now right click select properties 2 LAN

4. On the General tab select Internet Protocol (TCP / IP) and then select Properties

5. Set the IP addresses manually, enter the IP address use the Following the

IP Address: 192.168.1.3

Subnet mask: 255.255.255.0

Default Gateway: 192.168.1.1

To control the content of the

Prefered: 8.8.8.8

Alternate: 8.8.4.4

6. Once filled out correctly, click OK.

7. Go back to Go to start | Control Panel | Network Connections blocks 1 and LAN 2 LAN then right-click

8. Select the connection brigde

9. Wait until the connection is completed brigde

 On Computer B

1. Log start | Control Panel | Network Connections

2. Right-click the LAN 3 (a computer connected to LAN 2 A) select properties

3. On the General tab select Internet Protocol (TCP / IP) and then select Properties

4. Set the IP addresses manually, enter the IP address use the Following the

IP Address: 192.168.1.4

Subnet mask: 255.255.255.0

Default Gateway: 192.168.1.1

To control the content of the

Prefered: 8.8.8.8

Alternate: 8.8.4.4

6. Once filled out correctly, click OK.

7. Restart the computer

8. Congratulations you have two computers connected to the Internet both!

*) Warning: Notice the difference was no IP Address LAN 1, LAN 2, LAN 3 and Gateway (Have we all give a red color, different is not it? But it's not a rule of thumb, you can customize it)

A new generation of Intel chips will support Super High Resolution Display

Latest technology news, latest intel Chips will provide support for ultra high resolution display, according to information seen by wired.com in a slide presentation of intel prosesesor development forum last week, intel will present "Ivy Bridge"

Still according to slide presentation, Ivy Bridge Chip will light the display resolution up to 4096 x 4096 pixels on a single monitor, as well as processing for 4 k video QuadHD

Ivy Bridge feature Intel chips is a unique 3D transistor using thin silicon Ridge at the power strip is usually used in 2D transistor. The changes become more cost-efficient 3D transistor made 30 percent of the planar transistor, and only with an increase in the cost of 2 to 3 percent. This development is one of the major steps to compete with intel's chips from the ARM architecture, and also allows for portable notebook with a screen similar to the Retina Display Apple with a much larger scale.

Intel chips with Ivy Bridge is going to be mass produced at the end of this year.

The simplest way to strengthen wifi signal

If your wifi connection still slow, you can use this trick to strengthen your wifi signal.

Take a seat and watch these pictures:

Now we just point to which part will get a stronger wifi signal ...

Sending Fax online

One technology that refuses to give up on the present technology is the fax. Large and small Companies use the computer as a fax machine to exchange documents, contracts and so on.

Faxing has still become an efficient communication. You need to print page you want to send it and put it on the fax machine. Even on the printer all-in-one printer or copy and fax capabilities, which can prevent you from two steps above, you do not know when the device will be damaged. Ink cartridge and toner spent quite a lot of money and if you will send fax outside your area, or abroad, you will get more bills. Home office users, small businesses and independent professionals cannot determine whether or not need a fax machine.

If you still rely on fax machine you can use the internet as an alternative to more expensive, and reliable. And it is an online alternative to faxing. You can upload the files you want to an online fax service that is connected to the office phone and the web server or send the file via email.

Using an online fax service you just enter the destination fax number. There are various formats which you can send as Word, PDF, JPEG, TIFF and other images.

Fastest internet : 100 terabytes per second

The researchers have set a world record by transferring more than 100 terabytes of data per second through single optical fiber cable.

So how much data, exactly? Yes, 100 is equivalent to 250 terabits of Blu-ray disc two sides, or approximately three months of HD video continues to play, successfully transferred.

According to NewScientist, who was quoted on Tuesday (03/05/2011), Dayou Qian from NEC managed to achieve data transmission rates of terabits per second 101.7 through 165 kilometers of fiber.

Qian managed to "squeeze" the speed of light from 370 laser pulses separately be received by the recipient. Each laser emitted infrared spectrum closely their own narrow, and each contains some polarity, phase and amplitude of light waves to the code of each packet of information.

Meanwhile, Jun Sakaguchi of Japan's National Institute of Information and Communications Technology in Tokyo was also able to transmit data with 100-terabit-per-second benchmarks by developing a fiber with 7 cores. Each core of each carry 5.6 terabits per second, yielding a total of 109 terabits per second.

"We are introducing a new dimension, spatial multiplication, to increase transmission capacity,"says Sakaguchi.

However, Ting Wang NEC believes the first application 100-terabit transmission is likely to occur in the data center giants like Google, Facebook and Amazon.

Type of Wireless network from A,B,G or N

When you configure a wireless network, you have a wide choice of wireless technology or wireless networking standard that you want to use. Each wireless standard has various characteristics, such as speed and range. The way this technology works arranged by the Institute of Electrical and Electronics Engineers (IEEE), and the code name for the 802.11 wireless networking standard. This standard is basically a written document that describes how the IEEE wireless devices should operate. These documents help manufacturers to develop wireless products that will work with products from other manufacturers.
Because wireless networks have been developed and hold, then the IEEE has had several different wireless standards.

Understand wireless network alphabet

From the beginning until today is still growing, here is a wireless standard that has been created by the IEEE for wireless networking industry today:

1. 802.11a: This standard is little used, especially in the consumer market, but some computers bundled with dual-band wireless (802.11a / g). Although the standard is older than 802.11b (will be explained later), he has (or better) or equal to the maximum speed of 802.11g, which later became standard. 802.11a standard is the only one that uses a different frequency range (5 GHz, not 2.4 GHz), so use this standard means that you can not have a problem with interference from other networks almost as popular or more. However, due to high frequency, the signals from 802.11a products are generally not as far as that reached by signals from devices that use other standards.

2. 802.11b: This is the first wireless networking standard that is widely used in homes and businesses. This standard has now been replaced by 802.11g. If you buy a computer with an integrated (built-in) wireless or purchase wireless products before the first semester of 2003, the computer may use a 802.11b wireless component.

3. 802.11g: This is the most widely used standard today. This is similar to 802.11b, but is an improved version with a much greater speed of up to 54 Mbps. Products 802.11g standard is compatible with 802.11b, so you can mix the two devices in the same wireless network. Earlier 802.11a standard is incompatible with both this standard and did not even use the same frequency. If you buy a computer with integrated wireless product or bought after the first semester of 2003, the wireless components that tend to be used is the standard 802.11g.

4. 802.11n: A standard developed that is compatible with 802.11b and g products When this standard is completed, you may be able to get data rates up to 540 Mbps, which is ten times faster than existing standards. In addition, this product will have a longer range by using smart-antenna technology is strong, called Multiple Input Multiple Output (MIMO), which is already available on some wireless networking products. You can already buy products based on this technology is referred to as pre-n or 802.11n products. However, both your wireless router and computer must be compatible with 802.11n to all amenities.

How To Control PC From Cell Phones with PC in My Hand

PC In My Hand is a professional and reliable application designed to help you realize your ideas, control your system remotely from the Internet using your mobile device when you need it. Available for the iPhone, Android, BlackBerry, Windows Mobile / PPC, Nokia / Symbian, Palm, ipad or notebook and more.

Recommended PC in My Hand as follows:

1. Remote control: turn your PC on the remote, and turn off, and restart

2. Webcam capture: Keeping a watchful eye on offices and homes

3. File Transfer: Transfer files between your device and remote PC clients
PC In My Hand

Before you begin, make sure your PC is connected to your router by LAN cable. To use the PC has a wired network interface card (NIC) that supports WOL and a router connected to the internet is required. If you've already done that, then, let's get started. Step 1, select the cable network will be tied to the PC Card in My Hand.

After finishing the installation, run PC programs on your PC Step In My Hand to launch configuration. You can find a shortcut to the program.

In the following steps, you will be prompted to register pcinmyhand.com account so you can access this PC anywhere via your mobile browser. It's free, fast & easy. If you already have one, please enter it. In step NIC choose, just select the card online network that the program will generate some appropriate value. Maintain standards if changes are not necessary. If a particular port is occupied by another application, unfortunately, then enter the number on the front, such as 18 100, 28 100 or 38 100 etc..

Click the blue link text "click login" at the last step to open the page setup gateway router interface, or manually open a browser with an IP gateway to resume the next step in this stage if you are already registered if it has not Choose the column below for registration to be used in The following process. Step 2 binds your network card to this router step requires you to make four entries on the router: 1, Address Reservation,

2, Port Forwarding,

3, ARP Binding;

4, Dynamic DNS.

Examples mentioned here are the TP-LINK router, another brand router can be set by reference. If you do not know how well the configuration, check your router product manual.

For the next stage because I do not use your router please read on the page following the setup guide complete with screenshots and software, tutorials above are just my first step input.

http://www.pcinmyhand.com/setupguide.html

Tricks of Saving Bandwidth Quota and Browsing Faster with Slipstream

Slipstream is a Software To Save Quota connection bandwidth and speed for dial-up 10x faster, faster 5x broadband and GPRS up to 8x faster. This is because Slipstream uses compress and uncompress accelerate data that makes the Internet connection is faster and Save bandwidth.



* To accelerate compress and uncompress data
* To accelerate speed web browsing, sending and receiving emails
* Compress the data to make your internet speed increases;
a. Dial-up up to 10x faster
b. Broadband up to 5X faster
c. GPRS up to 8X faster
* Compatible on Windows PCs, Machintosh, and PocketPC (PDA)
* Working on all the network access the Internet (ISP) in the whole world
* It is important for Quota-based Internet client data; download data up to 10x more
* Internet-based time; at a cost of Rp / s same download more data and more quickly
* Save bandwidth, bandwidth efficient

Download Slipstream >>>> Here

Download Slipstream Account >>>> Here


To use or check that your browser has been using Slipstream:
Internet Explorer: click tools - internet options - connections - lan settings
Firefox: Tools - options - advanced - settings
Opera 9: Tools - preferences - advanced - network - proxy server
HTTP Proxy: 127.0.0.1 Port 5400

Good try, and Feel the difference after using this Slipstream ...

FOR MORE , VISIT HERE: WWW.FREEINTERNETTRICK.CO.CC

Angry IP Scanner Tutorial

This is the unofficial Angry IP help page.

Product: Angry IP Scanner
Company Homepage: http://www.angryziber.com/
Product Forum: http://www.angryziber.com/forum/forum.php?forum=0

Please use this page as much as possible to learn about or to solve problems with Angry IP Scanner. If you can't find help here you can always post a message in the forum later.

What is Angry IP Scanner?

Angry IP Scanner is a program that allows you to "scan" a network to locate network devices. It is a great program for doing a network audit or for just finding out more information about your network. Angry IP Scanner will located any network device (Computer, Printer, Network Hard Drives, etc..) that responds to the scan. In other words, it will locate any device on the network that has an IP address and that doesn't have some sort of firewall.

Basic Tutorial

Angry IP Scanner is a very powerful network scanner. It is a great tool for doing network audits, locating network devices or computers, and finding out information about your network. If you don't understand any term while reading this help page please see the glossary near the bottom of the page.

Enter an IP range to begin using the program. Click on the double arrow on the right side for more options.



Click on the button under "Hostname:" to choose different columns. Click on the "..." next to "Scan ports" to scan hosts for open ports.



Click "Start" to begin the Scan.

General Troubleshooting and Tips

How to ping a computer: "Start Menu" > Run > type "ping". Then a space and then an IP address. Then click OK.


You should get a reply like below:


If you can't ping a computer than Angry IP Scanner won't find it.

How to use "ipconfig":
Go to "Start Menu" > Run > type "cmd"


At the Command Prompt type "ipconfig /all". This will display useful information.

"IP Address" is your computer's IP address. "Default Gateway" is normally your router or server. "DHCP Server" is normally your router or server. "Physical Address" is your MAC address.


Angry IP Scanner won't tell me what user is logged on:
The messenger service has to be running on the systems you scan to be able to see which user is logged on.

List of Potential Software Firewalls Interfering with IP Scan:
Norton Internet Security
Norton Personal Firewall
Mcafee Personal Firewall
Zone Alarm
Sygate Personal Firewall
Windows XP SP2 Firewall
Windows XP (Pre SP2) Firewall
Routers also contain a firewall
etc...


Can't find computers behind router
Almost all routers today also function as a type of firewall. If you try to scan a network that is connected to a router that you are not connected to the scan will fail to find anything except the router. Routers can be configured to forward ports and allow traffic to pass through, but this is not the default setting. Angry IP Scanner is made to scan your local network only. Using it to scan external network requires advance knowledge of networking.


List of Common Ports:
21 FTP
22 SSH
23 Telnet
25 SMTP
53 DNS (Domain Name Service)
68 DHCP
80 HTTP (HyperText Transfer Protocol)
110 POP3 (Post Office Protocol, version 3)
115 SFTP (Secure File Transfer Protocol)
119 NNTP (Network New Transfer Protocol)
123 NTP (Network Time Protocol)
137 NetBIOS-ns
138 NetBIOS-dgm
139 NetBIOS
143 IMAP (Internet Message Access Protocol)
161 SNMP (Simple Network Management Protocol)
194 IRC (Internet Relay Chat)
220 IMAP3 (Internet Message Access Protocol 3)
389 LDAP (Lightweight Directory Access Protocol)
443 SSL (Secure Socket Layer)
445 SMB (NetBIOS over TCP)
993 SIMAP (Secure Internet Message Access Protocol)
995 SPOP (Secure Post Office Protocol)
4000 ICQ
5010 Yahoo! Messenger
5190 AOL Instant Messenger
5632 PC Anywhere
5800 + 5900 VNC (Remote Admin Software)
8080 HTTP Proxy

For a complete list of ports see here:
http://www.chebucto.ns.ca/~rakerman/port-table.html
http://www.iss.net/security_center/advice/Exploits/Ports/default.htm
http://www.iana.org/assignments/port-numbers
http://lists.gpick.com/portlist/portlist.htm

Glossary

IP Address: An IP address is a number used to identify a network device or computer on a network using the TCP/IP protocol. An IP address consists of 4 numbers each separated by a period. Each number is between 1 and 255.

MAC Address: This is also an address used to identify network devices. MAC addresses are not protocol dependent and are normally built into the hardware.

Subnet Mask: The subnet mask consists of 4 numbers each separated by a period. This number is used to identify which part of an IP address is the network portion and which part is the host portion.

Ping: An action performed on a network device where a small amount of data is sent to the device and the sender times how long it takes for the network device to respond. Response time is normally measured in milliseconds. Firewalls can prevent a device from responding to a ping.

Host: Another way of referring to a computer or network device on a network.

Router: A network device used to share a single public IP address to many private IP addresses.

Port: A port is like a door into a network device. A port number can range from 1 to 65536. An open port normally indicates something waiting for a connection.

Hostname: The name used to refer to a computer or network device.

DNS Server: DNS servers convert Hostname's to IP addresses so that computers can communicate with each other.

Firewall: Any software or hardware mechanism that prevents a network device from responding to unknown network request.

How to adjust your Window XP TCP Connection to boost your BT download speed?

With the release of Microsoft Windows XP Service Pack 2 (SP2), it has limit the concurrent TCP connection to 10 connection per seconds.

With Service Pack 1 or without any service pack installed, your computer has no limit on the number of concurrent TCP connection.

Why Microsoft Windows Service Pack 2 (SP2) want to limit the number of TCP connection?
This is to reduce the speed of computer virus or worms spreading across the network.

How it affect the BT download speed?


BT tend to open a lot of outbound TCP connection at one time to download from different sources. With only 10 connection per second, it might reduce the BT download speed.

How do i know if my computer has reach the maximum TCP connection?
To know if you’re hitting concurrent TCP connection attempts limit, Go to Control Panel -> Administrative Tools -> Event Viewer -> System, look for TCP/IP warning “TCP/IP has reached the security limit imposed on the number of concurrent TCP connect attempts”. It has the Event ID of 4226

How to adjust my Window XP TCP Connection to boost my BT download speed?
Just change the 10 tcp connection limit to 10,000. To change the limit on TCP connection in Windows XP SP2, you can use the following program that works on every language of Windows XP:-

Event ID 4226 Patcher version 2.23d
Website: http://www.lvllord.de/

You might want to back up the tcpip.sys, although the program has the ability to restore tcpip.sys to original state.

Once you change your TCP Connection number, restart the PC and now your BT download speed will be more better :)
FOR MORE , VISIT HERE: WWW.FREEINTERNETTRICK.CO.CC

Optimize Broadband & Dsl Connections and increase your internet speed

These settings allow you to boost the speed of your broadband Internet connection when using a Cable Modem or DSL Router with Windows 2000 and Windows XP.

Open your registry and find the key below.

Create the following DWORD values, as most of these values will not already exist you will need to create them by clicking on ‘Edit -> New -> DWORD Value’ and then set the value as shown below.

DefaultTTL = “80″ hex (or 128 decimal)
Specifies the default time to live (TTL) for TCP/IP packets. The default is 32.

EnablePMTUBHDetect = “0″
Specifies whether the stack will attempt to detect Maximum Transmission Unit (MTU) routers that do not send back ICMP fragmentation-needed messages. The default is 0.

EnablePMTUDiscovery = “1″
Specifies whether the TCP/IP stack will attempt to perform path MTU discovery as specified in RFC 1191. The default is 1.

GlobalMaxTcpWindowSize = “7FFF” hex (or 32767 decimal)
Specifies the system maximum receive window size advertised by the TCP/IP stack.

TcpMaxDupAcks = “2″
Determines the number of duplicate ACKs that must be received for the same sequence number of sent data before “fast retransmit” is triggered.

SackOpts = “1″
Enables support for selective acknowledgements as documented by Request for Comment (RFC) 2018. Default is 0.

Tcp1323Opts = “1″
Controls RFC 1323 time stamps and window scaling options. Possible values are: “0″ = disable RFC 1323 options, “1″ = window scale enabled only, “2″ = time stamps enabled only and “3″ = both options enabled.

TcpWindowSize = “7FFF” hex (or 32767 decimal)
Specifies the receive window size advertised by the TCP/IP stack. If you have a latent network you can try increasing the value to 93440, 186880, or 372300.

Exit your registry and restart Windows for the changes to take effect.

If you don’t want to edit the registry, here’s a little TCP utility that is ideal…

http://www.broadbandreports.com/front/doctorping.zip
FOR MORE , VISIT HERE: WWW.FREEINTERNETTRICK.CO.CC